The following sections included on this page, are for maintenance on the Clutch;
[1] - CHECKING THE LIGHTS, SIGNALS AND SWITCHES
[2] - ADJUSTING THE HEADLIGHT BEAM
[3] - REPLACING THE HEADLIGHT BULB
[1] - CHECKING THE LIGHTS, SIGNALS AND SWITCHES
[2] - ADJUSTING THE HEADLIGHT BEAM
[3] - REPLACING THE HEADLIGHT BULB
[1] - CHECKING THE LIGHTS, SIGNALS AND SWITCHES
© cvvmax December 2013
1. Check that all switches operate and that all lights come on.
© cvvmax December 2013
1. Check that all switches operate and that all lights come on.
[2] - ADJUSTING THE HEADLIGHT BEAM
© cvvmax December 2013
1. Adjust:
• Headlight beam (vertically)
a. Turn the adjusting screw " 1 " with a screw driver in direction "a" or "b".
Direction "a"
Headlight beam is raised.
Direction "b"
Headlight beam is lowered.
© cvvmax December 2013
1. Adjust:
• Headlight beam (vertically)
a. Turn the adjusting screw " 1 " with a screw driver in direction "a" or "b".
Direction "a"
Headlight beam is raised.
Direction "b"
Headlight beam is lowered.
2. Adjust:
• Headlight beam (horizontally)
a. Turn the adjusting screw " 1 " with a screwdriver in direction "a" or "b".
Direction "a"
Headlight beam moves to the left.
Direction "b"
Headlight beam moves to the right.
• Headlight beam (horizontally)
a. Turn the adjusting screw " 1 " with a screwdriver in direction "a" or "b".
Direction "a"
Headlight beam moves to the left.
Direction "b"
Headlight beam moves to the right.
[3] - REPLACING THE HEADLIGHT BULB
© cvvmax December 2013
1. Remove:
• Headlight lens unit " 1 "
© cvvmax December 2013
1. Remove:
• Headlight lens unit " 1 "
2. Disconnect:
• Headlight coupler "2"
3. Remove:
• Headlight bulb cover "3"
• Headlight coupler "2"
3. Remove:
• Headlight bulb cover "3"
4. Detach:
• Headlight bulb holder "4"
5. Remove:
• Headlight bulb "5"
• Headlight bulb holder "4"
5. Remove:
• Headlight bulb "5"
Since the headlight bulb gets extremely hot, keep flammable products and your hands away from the bulb until it has cooled down.
6. Install:
• Headlight bulb (NEW)
Secure the new headlight bulb with the headlight bulb holder.
6. Install:
• Headlight bulb (NEW)
Secure the new headlight bulb with the headlight bulb holder.
Avoid touching the glass part of the headlight bulb to keep it free from oil, otherwise the transparency of the glass, the life of the bulb and the luminous flux will be adversely affected. If the headlight bulb gets soiled, thoroughly clean it with a cloth moistened with alcohol or lacquer thinner.
7. Attach:
• Headlight bulb holder
8. Install:
• Bulb cover
7. Attach:
• Headlight bulb holder
8. Install:
• Bulb cover
When installing the headlight bulb cover, make sure the 'TOP" mark " 1 " faces upwards.
9. Connect:
• Headlight coupler
10. Install:
• Headlight lens unit
• Headlight coupler
10. Install:
• Headlight lens unit
© 2013-15 cvvmax. No animals, HDs or Ducatis were harmed in the making of this site.